Sony DCR-IP55 - Manual (Page 13)

Quick Start Guide
13
Recording a still image on a “Memory Stick”
(p. 114)
When you purchase your camcorder, the clock setting is not
set up yet. If you want to record the date and time for a
picture, set the clock setting before recording (p. 22).
Viewfinder
When the LCD panel is closed,
use the viewfinder.
Adjust the viewfinder lens to
your eyesight (p. 33).
Monitoring the still image on the LCD screen
(p. 135)
1
Set the POWER switch to MEMORY/NETWORK
(DCR-IP55 only) or VCR.
The MEMORY/NETWORK or VCR lamp lights up.
2
Press PLAY or PB.
The last recorded image is
displayed.
Note
Do not pick up your
camcorder by the LCD
panel, the battery pack, the
flash or the jack cover.
4
Slide OPEN in the direction
of the B mark indicated on
the camcorder to open the
LCD panel. The picture
appears on the LCD screen.
2
Turn the grip to the
recording position, and
hold your camcorder
through the wrist strap.
3
Set the POWER switch
to MEMORY/
NETWORK (DCR-IP55
only). The MEMORY/
NETWORK lamp lights
up.
5
Press PHOTO
lightly.
When the green z
mark stops flashing,
then lights up, you
can record a still
image.
6
Press PHOTO
deeper.
The image when you
pressed PHOTO
deeper will be
recorded on a
“Memory Stick”.
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR
1
Remove the lens cap.
PLAY
PB
PHOTO
PHOTO