Viewing the recording on tv – Sony DCR-IP55 User Manual

Page 47

Advertising
background image

47

Playback

Basics

Connect your camcorder to your TV with the A/V connecting cable supplied with your
camcorder to watch the playback pictures on the TV screen. You can operate the
playback control buttons in the same way as when you view playback pictures on the
LCD screen. When viewing the playback picture on the TV screen, we recommend that
you power your camcorder from a wall outlet using the AC power adaptor (p. 20).
Refer to the operating instructions of your TV.

Open the jack cover. Connect your camcorder to the TV with the A/V connecting cable.
Then, set the TV/VCR selector on the TV to VCR.
The supplied A/V connecting cable is equipped with an S video plug and a video plug.
Use either the S video plug or the video plug depending on the TV. Do not connect both
of the plugs to the TV.

If your TV is already connected to the VCR

Connect your camcorder to the LINE IN input on the VCR with the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.

Viewing the recording on TV

S VIDEO

VIDEO

AUDIO

IN

Red

Yellow

White

: Signal flow

A/V connecting
cable (supplied)

Black

A/V

Advertising
This manual is related to the following products: