Sony DCR-IP55 - Manual (Page 28)

28
Step 4 Using the touch panel
Notes
•When using the touch panel, press the LCD screen lightly with your thumb, the
supplied stylus (DCR-IP55 only) or index finger supporting the LCD screen from the
back side of it.
•Do not press the LCD screen with sharp objects other than the stylus supplied (DCR-
IP55 only).
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can make the display appear and disappear with DSPL/TOUCH PANEL on your
camcorder.
•When the operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 203).
•When the LCD screen gets dirty, use the supplied cleaning cloth.
When executing each item
The green bar appears above the item.
If an item is not available
The color of the items changes to grey.
Touch panel
You can operate with the touch panel using the viewfinder (p. 73).
Press FN to display the following buttons:
In CAMERA mode
PAGE1 SPOT FOCUS, MENU, FADER, END SCH, EXPOSURE, SPOT METER
PAGE2 SELF TIMER, TITLE, DIG EFFT, MEM MIX
PAGE3 LCD BRT, VOL, COUNT RESET
In VCR mode
PAGE1 MENU, VOL, TITLE, MULTI SCH
PAGE2 LCD BRT, DIG EFFT, PB ZOOM, END SCH
PAGE3 DATA CODE, COUNT RESET, REC CTRL
See page 107 when you set the POWER switch to MEMORY/NETWORK (DCR-IP55
only).