Self-diagnosis display – Sony DCR-IP55 User Manual

Page 190

Advertising
background image

190

C:21:00

Self-diagnosis display

Five-digit display

Cause and/or Corrective Actions

• You are using a battery pack that is not an

“InfoLITHIUM” battery pack.

c Use an “InfoLITHIUM” battery pack (p. 20, 196).

• Moisture condensation has occurred.

c Remove the cassette and leave your camcorder for at

least one hour to acclimatize (p. 201).

• The video heads are dirty.

c Clean the heads using the cleaning cassette (optional)

(p. 202).

• A malfunction other than the above that you can service

has occurred.*

c Remove the cassette and insert it again, then operate

your camcorder.

c Disconnect the power cord of the AC adaptor or remove

the battery pack. After reconnecting the power source,
operate your camcorder.

• A malfunction that you cannot service has occurred.

c Contact your Sony dealer or local authorized Sony

service facility and inform them of the 5-digit code.
(example: E:61:10)

If you are unable to rectify the problem even if you try corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.

* Do not perform this operation if moisture starts to condense (p. 201).

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a five-digit code (a combination
of a letter and figures) on the screen. If a five-digit
code is displayed, check the following code chart.
The last two digits (indicated by ss) will differ
depending on the state of your camcorder.

C:21:ss

LCD screen or Viewfinder

Self-diagnosis display

•C:ss:ss

You can service your camcorder
yourself.

•E:ss:ss

Contact your Sony dealer or local
authorized Sony facility.

E:20:ss
E:61:ss
E:62:ss

C:31:ss
C:32:ss

C:04:ss

C:22:ss

Advertising
This manual is related to the following products: