Sony DCR-IP55 - Manual (Page 18)

18
2
3
1
4
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR
Charging the battery pack
Charge the battery pack before using your camcorder.
Your camcorder operates only with the “InfoLITHIUM” battery pack (F series).
See page 196 for details of the “InfoLITHIUM” battery pack.
(1) Open the DC IN jack cover and connect the supplied AC power adaptor to the DC
IN jack on your camcorder with the plug’s v mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHG).
The battery CHG lamp lights up when the charge begins. After charging is
completed, the battery CHG lamp goes off (full charge).
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camcorder.
Note
Prevent metallic objects from coming into contact with the metal parts of the DC plug of
the AC power adaptor. This may cause a short-circuit, damaging the AC power
adaptor.
Step 1 Preparing the power supply
Battery CHG lamp
To a wall outlet