Sony DCR-IP55 - Manual (Page 175)

175
Customising Your Camcorder
Changing the menu settings
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
FLASH LVL
WHT BAL
N.S. LIGHT
AUTO SHTR
Mode
——
——
HIGH
z NORMAL
LOW
——
z ON
OFF
z ON
OFF
Meaning
To suit your specific shooting requirement.
To add special effects like those in films or on the TV
to images (p. 61, 75).
To make the flash level higher than normal.
To use the normal setting.
To make the flash level lower than normal.
To adjust the white balance (p. 54).
To use the NightShot Light function (p. 38).
To cancel the NightShot Light function.
To automatically activate the electronic shutter when
shooting in bright conditions.
To not automatically activate the electronic shutter
even when shooting in bright conditions.
POWER
switch
CAMERA
MEMORY/
NETWORK*
CAMERA
VCR
CAMERA
MEMORY/
NETWORK*
CAMERA
MEMORY/
NETWORK*
CAMERA
MEMORY/
NETWORK*
CAMERA
* DCR-IP55 only.
FLASH LVL
You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the
flash level.
Menu items are displayed as the following icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEMORY SET
CM SET
TAPE SET
SETUP MENU
OTHERS
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The LCD screen shows only the items you can operate at the moment.