Sony DCR-IP55 - Manual (Page 182)

182
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
AREA SET
DST SET**
BEEP
COMMANDER
DISPLAY
REC LAMP
Meaning
When you press the DATA CODE button on the
Remote Commander, the date, time and various
settings during playback (p. 43).
The date and time are displayed during
playback.
To set your area temporarily, when using the
camcorder, in a new location (p. 22).
To be used when your area is not in daylight
saving time.
To be used when your area is in daylight saving
time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
To output the beep instead of the melody.
To cancel melody and the beep sound.
To activate the Remote Commander supplied
with your camcorder.
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control.
To show the display on the LCD screen and
viewfinder.
To show the display on the TV screen, LCD
screen and viewfinder.
To light up the camera recording lamp at the
front of your camcorder.
To turn the camera recording lamp off so that the
subject is not aware of recording.
POWER
switch
MEMORY/
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
CAMERA
MEMORY/
NETWORK*
CAMERA
MEMORY/
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
VCR
CAMERA
MEMORY/
NETWORK*
Mode
z DATE/CAM
DATE
——
z OFF
ON
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
Changing the menu settings
* DCR-IP55 only.
** Instead of DST, SUMMERTIME is displayed on the screen for some models.
Note
If you press DSPL/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu
settings, the picture from a TV or VCR will not appear on the LCD screen even when
your camcorder is connected to the output jacks on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
In more than five minutes after removing the power source
The PROGRAM AE, FLASH LVL, WHT BAL and COMMANDER items return to their
default settings.
Other menu items are held in memory even when the battery is removed.