Sony DCR-IP55 - Manual (Page 42)

42
— Playback – Basics —
Playing back a tape
You can monitor the recorded tape etc. on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder. You can also control playback
using the Remote Commander.
(1) Prepare the power source and insert the recorded tape.
(2) Set the POWER switch to VCR.
(3) Slide OPEN in the direction of the B mark to open the LCD panel.
(4) Press
to rewind the tape.
(5) Press to start playback.
(6) Adjust the volume following the steps below.
1 Press FN to display PAGE1 (p. 27).
2 Press VOL. The screen for the volume adjustment appears.
3 Press –/+ to adjust the volume.
– : to decrease the volume.
+ : to increase the volume.
(7) Press OK. The display returns to PAGE1.
5 4 2
6,7
3
1
VOL +
OK
FN
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR
The bar indicator
To return to FN
Press EXIT.
To stop playback
Press on the LCD screen or STOP on the Remote Commander.