Sony DCR-IP55 - Manual (Page 189)

189
Troubleshooting
Types of trouble and how to correct trouble
Symptom Cause and/or Corrective Actions
• Charging is completed.
• The battery pack is not properly installed.
c Install it properly (p. 17).
• The POWER switch is not set to OFF (CHG).
c Set it to OFF (CHG).
• The AC power adaptor is not connected to a wall outlet.
c Connect it to a wall outlet.
• The battery pack is not properly installed.
c Install it properly (P. 17).
• Something is wrong with the battery pack.
c Please contact your Sony dealer or local authorized Sony
service facility.
• This is because some functions use a linear mechanism.
This is not a malfunction.
• The DSPL/TOUCH PANEL button is pressed.
c Press the LCD screen lightly.
c Press DSPL/TOUCH PANEL on your camcorder or
DISPLAY on the Remote Commander (p. 43).
c Adjust the LCD screen (CALIBRATION) (p. 203).
• The mirror mode is activated.
This is not a malfunction (p. 35).
• It occurs if you set DISPLAY to V-OUT/LCD in the menu
settings when using mirror mode. This is not a
malfunction.
• The USB cable was connected before installation of the
USB driver was completed.
c Uninstall the incorrect USB driver and reinstall the
USB driver (p. 155).
•Moisture condensation has started to condense in your
camcorder (p. 201).
The buttons do not appear on the
touch panel.
The buttons on the touch panel do
not work.
The indicators appear mirror-
reversed in the viewfinder.
While charging the battery pack, the
battery CHG lamp flashes.
You cannot charge the battery pack
installed on the camcorder.
While charging the battery pack
installed on the camcorder, the
battery CHG lamp does not light up.
Image data cannot be transferred by
the USB connection.
A cassette cannot be removed even if
the cassette lid is open.
When you set the POWER switch to
VCR or OFF (CHG), if you move
your camcorder, you may hear a
clattering sound from inside your
camcorder.
The characters on the TV screen are
reversed.