Sony DCR-IP55 - Manual (Page 89)

Editing
89
2 Making a recording
Before operation
Set DISPLAY to LCD in
in the menu settings. (The default setting is LCD.)
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If you
are recording a tape from the VCR, insert a recorded tape into the VCR.
(2) Set the POWER switch to VCR.
(3) Set the camcorder in the recording pause mode.
Press FN and select PAGE3.
Press qREC CTRL. Next, press REC PAUSE.
(4) Start playback on VCR if you record a tape from VCR. Select a TV program if you
record from TV. The picture from VCR or TV appears on the LCD screen or through
the viewfinder.
(5) Press REC START at the scene where you want to start recording from.
When you have finished dubbing a tape
Press on the LCD screen or STOP on the Remote Commander to stop recording on
your camcorder and stop playback on VCR or TV.
3,5
3
FN
PAGE1 PAGE2 PAGE3 EXIT
DATA
CODE
COUNT
RESET
q REC
CTRL
REC
PAUSE
q REC CTRL
RET.
PAGE3
REC
START
PB
S VIDEO
VIDEO
AUDIO
OUT
2
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR
: Signal flow
White
Red
A/V connecting cable (supplied)
Yellow
Recording video or TV programs
Black
A/V