Sony DCR-IP55 - Manual (Page 146)

146
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-IP55 only) or VCR.
(2) In MEMORY/NETWORK mode, go to step 3.
In VCR mode, press PB.
(3) Press INDEX on your camcorder to display the index.
(4) Press - MARK. The screen to protect the image appears.
(5) Press the image you want to protect. The “-” appears above the protected image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 5 again. The “-”
disappears.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
Preventing accidental erasure
– Image protection
3
INDEX
4,5
1
1 2 3
4 5 6
EXIT RET
- MARK
1 / 40
1 2 3
4 5 6
EXIT DEL MARK - MARK
T t
-
2 / 40 T t
- MARK