Sony DCR-IP55 - Manual (Page 43)

43
Playback
–
Basics
DATACODE
CAM
DATA DATE
DATA
OFF OK
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out.
If you leave the power on for a long time
Your camcorder gets warm. This is not a malfunction.
When you open or close the LCD panel
Make sure that the LCD panel is set vertically.
To display the screen indicators – Display function
Press DSPL/TOUCH PANEL on your camcorder or DISPLAY on the Remote
Commander.
The indicators disappear from the LCD screen.
To make the indicators appear, press DSPL/TOUCH PANEL or DISPLAY again.
Using the data code function
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
(1) In the playback mode, press FN and select PAGE3.
(2) Press DATA CODE.
(3) Select CAM DATA or DATE DATA, then press OK.
(4) Press EXIT.
Playing back a tape