Sony PCG-VX88 - Manual (Page 123)

Troubleshooting the Mouse and Touchpad
123
Troubleshooting the Mouse and Touchpad
My mouse does not work.
❑ Make sure the mouse is securely plugged into the USB port. See
“Connecting a USB Mouse or Keyboard” for more information.
❑ If you are still experiencing problems, use your supplied Application
Recovery CD to reinstall the mouse drivers. See “Using the Application
Recovery CD(s)” for more information.
My touchpad does not work properly.
❑ You may have disabled the touchpad without connecting a mouse to the
computer. To enable the touchpad:
1 Press the Windows key, and then press the Up Arrow key to select
All Programs. Press Enter.
2 Press the Down Arrow key to select Sony Notebook Setup, and press
Enter.
3 Make sure Sony Notebook Setup is selected, and press Enter.
4 Press the Right Arrow key to select the Touchpad tab.
5 Press the Tab key to select Enable Touchpad, and press Enter.
❑ Restart the computer to activate the touchpad again.
❑ If your touchpad is interpreting a single tap as a double-click, adjust the
button assignments. Follow these steps:
1 Press the Windows key, and then press the Up Arrow key to select
All Programs. Press Enter.
2 Press the Down Arrow key to select Sony Notebook Setup, and press
Enter.
3 Make sure Sony Notebook Setup is selected, and press Enter.
4 Press the Right Arrow key to select the Touchpad tab, and press
Alt+S simultaneously.
5 Make sure the Buttons tab is open, and press the Up Arrow and
Down Arrow keys to change the button assignments.
6 Press Enter to save your changes and close the dialog box.
О
Р
О
Р
О
Р