Sony PCG-VX88 - Manual (Page 52)

Change text in this variable definition to document title.
52
Connecting an i.LINK Optical Disc Drive
You can connect an i.LINK®
*
optical disc drive to your computer, port
replicator, or docking station. This computer is preinstalled with software that
enables you to create CDs and play DVD movies. The i.LINK optical disc drive
draws power from the computer through a peripheral cable. This peripheral cable
connects to both the i.LINK port and DC OUT jack on the computer.
†
To connect an i.LINK optical disc drive
1 Before connecting this drive, close any active applications to help prevent
data loss.
2 Insert the L-shaped connector of the peripheral cable (supplied with the
i.LINK drive) into the matching jack on the i.LINK drive. Secure the
connector by turning the LOCK device clockwise.
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394
connection. The i.LINK connection may vary, depending on the software applications, oper-
ating system and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other. Refer to the documentation that came with your compati-
ble i.LINK device for information on operating conditions and proper connection. Before
connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
† If you connect and use an optional drive when your computer is running on battery power,
the battery life will be reduced.
✍
If you use an optional drive when your computer is running on battery power, the
battery life will be shorter.