H3 - to connect a projector, To connect a projector – Sony PCG-VX88 User Manual
Page 67
Connecting an External Display
67
To connect a projector
1
Turn off the computer before you connect the projector.
2
Locate the VGA (Monitor)
port and the Headphone jack.
3
Plug the display cable (not supplied) into the VGA port, and plug the
opposite end into the appropriate port on the projector.
4
Plug the audio cable (not supplied) into the Headphone jack, and plug the
opposite end into the appropriate port on the projector.
5
Verify that the power cord is plugged into the projector and an AC outlet.
6
Turn on all external devices before you turn on the computer.
Connecting a Projector
✍
See the manual that came with your projector for more information on its installation
and use.
Power cord
Audio cable
(not supplied)
Projector
To Headphone jack
To VGA port
Display cable
(not supplied)