Sony PCG-VX88 - Manual (Page 132)

Change text in this variable definition to document title.
132
Troubleshooting Audio
My speakers have no sound.
❑ If the built-in speakers are turned off, press Fn+F3 or use the center Jog
Dial™ Control to turn on the speakers.
❑ If the speaker volume is turned to the minimum, press Fn+F4, and then press
Up Arrow or Right Arrow keys to increase the volume. You can also
use the center Jog Dial Control to adjust the volume.
❑ If nothing is displayed when you press Fn+F3 or Fn+F4, follow these steps:
1 Right-click the Volume icon on the taskbar, and select Adjust Audio
Properties.
2 Select the Audio tab, and click Advanced in the Sound Playback box.
The Advanced Audio Properties dialog box appears.
3 Make sure the Speakers tab is open and the correct speaker setup is
selected in the Speaker Setup box.
❑ Check the volume controls in the Windows® taskbar.
1 Right-click the Volume icon on the taskbar, and select Open Volume
Control. The Volume Control dialog box appears.
2 Make sure the mute check boxes are not selected. If they are selected,
click the check box to cancel the selection.
3 Close the Volume Control dialog box.
❑ Make sure the CD audio enable is turned on
1 Click Start on the Windows® taskbar, and then Control Panel.
2 Click Performance and Maintenance, and then System. The System
Properties dialog box appears.
3 Select the Hardware tab, and then click Device Manager. The Device
Manager dialog box appears, listing your computer hardware devices.
4 Double-click DVD/CD-ROM drives.
5 Double-click the listed drive name.
6 Click the Properties tab.