Sony PCG-VX88 - Manual (Page 137)

Troubleshooting Wireless LAN functions
137
the data transfer speed, move your computer away from obstructions or
closer to any access point you may be using.
❑ If you are using a Wireless LAN Access Point, the device may be
temporarily overloaded depending on the number of other devices
communicating via the access point.
❑ If your access point interferes with other access points, change the access
point channel. See your access point instructions for more information.
The communication speed is interrupted or slowed down
when MPEG2 data is transferred.
The typical effective data transfer speed via an access point is 4-5 Mbps when
adhering to the IEEE 802.11b standard. High-rate stream transfers with MPEG2
data may lower this rate.
Data transfers are interrupted.
Data transfer interruptions may occur with large files or use of microwaves and
cordless telephones when connected to an access point.
To avoid data transfer interruptions
❑ Move the computer closer to the access point.
❑ Make sure the access point connection is intact.
❑ Right-click the Wireless Network Connection icon on the taskbar,
and click Status. The Wireless Network Connection Status dialog box
appears.
❑ Change the access point channel. See your access point instructions for more
information.
Р