Panasonic DMC-FZ1000 - Manual (Page 167)

167
7. Shutter and Drive Settings
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
•
Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P225) .
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst
Mode.
∫ Changing the burst speed
1 Select the menu.
2 Press 3/4 to select the burst speed and then press [MENU/SET].
>
[Rec]
> [Burst Rate]
AFS AFS
L
3:2
H 60 i
MENU