Wi-fi setup] menu, P297) – Panasonic DMC-FZ1000 User Manual

Page 297

Advertising

297

12.

Using the Wi-Fi function

[Wi-Fi Setup] Menu

Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.

Select the menu.

•

Refer to

P283

for details.

•

For details on how to enter characters, refer to

section on

•

If you are using the PC with standard settings, you do not need to change the workgroup.

[Setup]

> [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set

[LUMIX CLUB]

Acquires or changes the “LUMIX CLUB” login ID.

[PC Connection]

You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is “WORKGROUP”.)

[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Exit the menu after it is set.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is
selected.
Exit the menu after it is executed.

[Device Name]

You can change the name of this unit.

Press [DISP.].

Enter the desired device name.
•

For details on how to enter characters, refer to

section on

•

A maximum of 32 characters can be entered.