Panasonic DMC-FZ1000 - Manual (Page 207)

207
9. Stabilizer, Zoom and Flash
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1 Select the menu.
2 Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].
3 Press 2/1 to set the flash output and then press [MENU/SET].
• You can adjust from [ j3 EV] to [ i 3 EV] in steps of 1/3 EV.
• Select [ n0] to return to the original flash output.
• [ i ] or [ j ] is displayed on the flash icon in the screen when the flash level is adjusted.
• It can be set only when [Wireless] (P209) in [Flash] is set to [OFF] and [Firing Mode] (P208) is
set to [TTL].
• The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
(P319)
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
• For details on Exposure Compensation, refer to P159 .
• The [Auto Exposure Comp.] setting also applies to an external flash. (P319)
Adjust the flash output
> [Rec] > [Flash]
Synchronizing the output of the built-in flash to the Exposure
Compensation
MENU