Panasonic DMC-FZ1000 - Manual (Page 308)

13. Connecting to other equipment
308
∫ Installing supplied software
• Before inserting the DVD, close all running applications.
1 Check the environment of your PC.
•
Operating environment of “ PHOTOfunSTUDIO ”
– OS:
Windows
R XP (32bit) SP3,
Windows Vista R (32bit) SP2,
Windows R 7 (32bit/64bit) or SP1,
Windows R 8 (32bit/64bit),
Windows R 8.1 (32bit/64bit)
– CPU:
Pentium
R III 500 MHz or higher (Windows R XP),
Pentium R III 800 MHz or higher (Windows Vista R ),
Pentium R III 1 GHz or higher (Windows R 7/Windows R 8/Windows R 8.1)
– Display:
1024
k768 pixels or more (1920k1080 pixels or more recommended)
– RAM:
512 MB or more (Windows
R XP/Windows Vista R ),
1 GB or more (Windows R 7 32bit/Windows R 8 32bit/Windows R 8.1 32bit),
2 GB or more (Windows R 7 64bit/Windows R 8 64bit/Windows R 8.1 64bit)
– Free hard disk space:
450 MB or more for installing software
• Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further operating
environment.
• For details on “SILKYPIX Developer Studio”, please read the support site given on P307 .
2 Insert the DVD with the supplied software.
3 Click on the [Applications] on the install menu.
•
If the automatic playback screen is displayed, you can display the menu by selecting and
executing [Launcher.exe].
• In Windows 8/Windows 8.1, you can display the menu by clicking a message that is
displayed after inserting the DVD and then selecting and executing [Launcher.exe].
• You can also display the menu by double-clicking [SFMXXXX] in [Computer] (XXXX
differs depending on the model).
4 Click on the [Recommended Installation].
•
Proceed with installation according to messages appearing on the screen.