P315 – Panasonic DMC-FZ1000 User Manual
Page 315
315
13.
Connecting to other equipment
1
Press
3.
2
Press
3/4 to select an item and then press [MENU/SET].
Selecting a single picture and printing it
1
Press
2/1 to select the picture and then press
[MENU/SET].
2
Press
3 to select [Print start] and then press [MENU/SET].
•
Refer to
for the items that can be set before starting to print the pictures.
•
Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
[Multi Select]
Multiple pictures are printed at one time.
•
Press
3/4/2/1 to select the pictures and then press [MENU/
SET].
(When [MENU/SET] is pressed again, the setting is canceled.)
•
After the pictures have been selected, press
2 to select [OK], and
then press [MENU/SET].
[Select All]
Prints all the stored pictures.
[Print Set (DPOF)]
Prints the pictures set in [Print Set] only.
[Favorite]
Prints the pictures set as favorites only.
3
Press
3 to select [Print start] and then press [MENU/SET].
•
If the print check screen has appeared, select [Yes], and print the pictures.
•
Refer to
for the items which can be set before starting to print the pictures.
•
Disconnect the USB connection cable after printing.
Pi
PictBridge
ctBridge
PictBridge