P272 – Panasonic DMC-FZ1000 User Manual
Page 272
12.
Using the Wi-Fi function
272
1
Select the menu.
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
4
Select [Single Select] or [Multi Select].
•
To change the setting or disconnect, press [Wi-Fi].
Sending selected images ([Send Images Stored in the Camera])
> [New Connection] > [Send Images Stored in the Camera] > [AV
device]
[Single Select] setting
1 Select the picture.
2 Press [MENU/SET].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected
again.
2 Select [OK].
•
The number of pictures that can be sent by [Multi
Select] is limited.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
2.