P251) – Panasonic DMC-FZ1000 User Manual
Page 251
251
12.
Using the Wi-Fi function
∫
This unit is compatible with NFC
Using the NFC “Near Field Communication ” function, you
can easily transfer data necessary for a Wi-Fi connection
between this camera and the smartphone.
∫
About the Wi-Fi connection lamp
∫
About the [Wi-Fi] button
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone)
•
The information required for connecting the smartphone to this
unit (QR code, SSID and password) is displayed.
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
•
This owner’s manual describes the procedure for [New Connection].
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones, refer to the
operating instructions of your device.
Lit blue:
The Wi-Fi connection is on standby
Blinking blue:
Sending/receiving data through the Wi-Fi
connection
[Wi-Fi]/[Fn2] button can be used in two ways, as [Wi-Fi] or
as [Fn2] (function 2).
At the time of purchase, it is initially set to [Wi-Fi].
•
Refer to
for details about the function button.
[New Connection]
[Select a destination from
History]
[Select a destination from
Favorite]