Panasonic DMC-FZ1000 User Manual
Page 357
357
14.
Others
•
Is it connected properly with the HDMI micro cable?
•
Is the [VIERA Link] on this unit set to [ON]?
> If the input channel does not switch automatically, use the remote control for the TV to
switch it.
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On].
(Refer to the operating instructions of the TV for details.)
•
Is the camera recognized by the PC correctly?
> Turn this unit off and on.
•
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
•
If there are two or more USB terminal on a single PC, try connecting the USB connection cable
to another USB terminal.
•
Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
•
A message prompting to format the card may be displayed when connecting, but do not format.
•
If the [Access] displayed on the monitor does not disappear, disconnect the USB connection
cable after turning this unit off.
VIERA Link does not work.
Cannot communicate with the PC.
The card is not recognized by the PC.
The card is not recognized by the PC.
(SDXC memory card is used.)