Panasonic DMC-FZ1000 User Manual
Page 185
185
8.
Functions Customized for Various Subjects and Purposes
∫
About Automatic Gain Control setting
Select [Auto Gain] on the screen shown in step
2
and set it.
∫
Combining RAW images in the card
On the screen shown in step
2
, set [Overlay] to [ON].
After [Start], images in the card will be displayed. Select the RAW images, press [MENU/
SET], and continue recording.
•
[Overlay] is available only for RAW images taken with this unit.
•
Image is not recorded until completion.
•
The recording information displayed for pictures taken with multiple exposures is the recording
information for the last picture taken.
•
Items shown in gray on the menu screen cannot be set during multiple exposures.
Not available in these cases:
•
This function is not available in the following cases:
–
When using [Time Lapse Shot]
–
When using [Stop Motion Animation]
•
[ON]:
The brightness level is adjusted according to the number of pictures taken and the
pictures are superimposed over each other.
•
[OFF]:
Compensate the exposure to match the subject so that all the superimposed exposure
effects will be just right.