Changing flash mode, P203, P203) – Panasonic DMC-FZ1000 User Manual

Page 203

Advertising
background image

203

9.

Stabilizer, Zoom and Flash

Applicable modes:

Set the built-in flash to match the recording.

1

Select the menu.

2

Press

3/4 to select [Flash Mode] and then press [MENU/SET].

3

Press

3/4 to select the item and then press [MENU/SET].

The flash is activated twice.
The interval between the first and second flash is longer when [

] or [

] is

set. The subject should not move until the second flash is activated.

The Red-Eye Reduction effect differs between people. Also, if the subject was far away from
the camera or was not looking at the first flash, the effect may not be evident.

Changing Flash Mode

>

[Rec]

> [Flash]

([Forced Flash On]) The flash is activated every time regardless of the recording

conditions.

Use this when your subject is back-lit or under
fluorescent light.

([Forced On/
Red-Eye])

¢

([Slow Sync.])

When taking pictures against a dark background landscape,
this feature will slow the shutter speed when the flash is
activated. Dark background landscape will appear brighter.

Use this when you take pictures of people in front of a
dark background.

Using a slower speed can cause motion blur. Using a
tripod can enhance your photos.

([Slow Sync./
Red-Eye])

¢

¢ It can be set only when [Wireless] in [Flash] is set to [OFF] and [Firing Mode] is set to

[TTL].

MENU

Advertising