Panasonic DMC-GX7SBODY - Manual (Page 74)

74
About the supplied software
VQT5A95 (ENG)
∫ Installing supplied software
•
Before inserting the CD-ROM, close all running applications.
1
Check the environment of your PC.
• Operating environment of “PHOTOfunSTUDIO 9.2 PE”
– OS:
Windows R XP (32bit) SP3,
Windows Vista R (32bit) SP2,
Windows R 7 (32bit/64bit) or SP1,
Windows R 8 (32bit/64bit)
– CPU:
Pentium R III 500 MHz or higher (Windows R XP),
Pentium R III 800 MHz or higher (Windows Vista R ),
Pentium R III 1 GHz or higher (Windows R 7/Windows R 8)
– Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
– RAM:
512 MB or more (Windows R XP/Windows Vista R ),
1 GB or more (Windows R 7 32bit/Windows R 8 32bit),
2 GB or more (Windows R 7 64bit/Windows R 8 64bit)
– Free hard disk space:
450 MB or more for installing software
• Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further operating
environment.
• For details on SILKYPIX Developer Studio 3.1 SE, please read the support site given on
P73.
2
Insert the CD-ROM with the supplied software.
• When you insert the supplied CD-ROM, the install menu will start.
3
Click on the [Recommended Installation].
• Proceed with installation according to messages appearing on the screen.
• The software compatible with your PC will be installed.
• On the Mac, SILKYPIX can be installed manually.
1 Insert the CD-ROM with the supplied software.
2 Double-click on the automatically displayed folder.
3 Double-click the icon in the application folder.
Not available in these cases:
• “PHOTOfunSTUDIO” and “LoiLoScope” are not compatible with Mac.
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book 74 ページ ２０１３年７月１１日 木曜日 午後２時４０分