Attach the i-alert™ condition monitor to the pump, Attach the i-alert, Condition monitor to the pump – Goulds Pumps 3796 i-FRAME - IOM User Manual
Page 110
Advertising
.030
101
For more information on how to set the impeller clearances, refer to the Impeller-clearance checks and
Impeller-clearance setting sections in Commissioning, Startup, Operation, and Shutdown.
Attach the i-ALERT
™
Condition Monitor to the pump
CAUTION:
Always wear protective gloves. The pump and condition monitor can be hot.
Tools required:
• 5/32 inch hex wrench
1. Attach the condition monitor (761B) to the bearing frame (228A) using the hex-head screw (372T)
provided.
372T
228A
761B
2. Tighten the hex-head screw with a 5/32 inch hex wrench to 6 ft-lbs (8 Nm).
Maintenance (Continued)
108
Model 3796 i-FRAME Installation, Operation, and Maintenance Manual
Advertising