Goulds Pumps 3796 i-FRAME - IOM - Manual (Page 78)

3. Remove the shaft assembly from the bearing frame (228A).
228A
134
370D
423
370C
4. Remove the jack screws (370D) with nuts (423).
5. Remove the bearing housing O-ring (496) and the bearings.
6. Remove the outboard bearing retaining snap ring (361A).
370D 423
134
361A
168A
496
7. Remove the bearing housing (134) and bearings (112A and 168A) from the shaft (122).
134
112
361A
168A
122
8. Remove the bearing locknut (136) and bearing lock washer (382).
9. Remove the inboard bearing (168A).
10. Remove the outboard bearing (112A).
Maintenance (Continued)
76 Model 3796 i-FRAME Installation, Operation, and Maintenance Manual