I-alert™ condition monitor troubleshooting, I-alert, Condition monitor troubleshooting – Goulds Pumps 3796 i-FRAME - IOM User Manual
Page 120
Advertising
i-ALERT
™
Condition Monitor troubleshooting
Symptom
Cause
Remedy
There are no green or red flashing LEDs.
The battery is dead.
Replace the condition monitor.
The unit is deactivated.
Activate the condition monitor.
The unit is malfunctioning.
Consult your ITT representative
for a warranty replacement.
The red LEDs are flashing, but the temperature and
vibration are at acceptable levels.
The baseline is bad.
Check the temperature and
vibration levels and reset the
condition monitor.
The unit is malfunctioning.
Consult your ITT representative
for a warranty replacement.
Troubleshooting (Continued)
118
Model 3796 i-FRAME Installation, Operation, and Maintenance Manual
Advertising