Rugged Ridge Fender Flare Kit, 93-98 Jeep Grand Cherokee (ZJ) User Manual

Page 12

Advertising
background image

Rev. 1/13

Page 12 of 19

SB

11635.10

Step 41. Remove the body cladding from the vehicle. First, lift

up the top edge to release the upper portion of the

cladding. Next pull bottom of cladding straight out

from side of vehicle.

Step 42. Carefully cut the marked section with a sawzall or

cutoff wheel. Use caution when trimming.

Step 43. Remove the body cladding retainer clip closest to the

rear wheel opening. The bottom slides to the side to

remove and then slide upward.

Step 44. Trim the retainer just below the upper clip portion

and reinstall onto the door.

Advertising