Rugged Ridge Fender Flare Kit, 93-98 Jeep Grand Cherokee (ZJ) - Manual (Page 6)

Rev. 1/13 Page 6 of 19 SB
11635.10
Step 17. Reinstall the inner fender liner. Some of the mounting
holes have been removed with trimming of the wheel
well. New mounting holes can be made or use zip ties
to hold the liner in place.
Step 19. Hold the flare against the body using slight pressure
to check fitment. Some trimming and sanding of the
flare may be necessary to ensure a smooth fit to the
body. Once the correct fit is achieved mark the
mounting holes on to the body using the holes in the
flare as a guide.
Step 20. Drill holes marked on fender using a 3/16” drill bit.
Step 18. Remove any and all emblems and lettering from the
front fenders. Clean any adhesive from surface.