Rugged Ridge Fender Flare Kit, 93-98 Jeep Grand Cherokee (ZJ) - Manual (Page 15)

Rev. 1/13 Page 15 of 19 SB
11635.10
Step 54. Trace a second line 1/4” off of the previous line towards
the rear of the vehicle.
Step 55. Remove the three plastic retainers that secure the rear
inner liner and remove the liner. Do not discard, all
pieces will be reinstalled.
Step 53. With the flare in place trace the edge of the flare onto
the rear bumper. This area of the bumper will be
trimmed for proper fitment of the flares.
Step 56. Trim the rear bumper cover at the second line drawn
using a sawzall or cut off wheel.