Tl1 error codes, Tl1 editing, Tl1 error codes -17 – ADTRAN MX2800 M13 User Manual

Page 141: Tl1 editing -17, Table 9-5. tl1 error codes -17, Code. refer to

Advertising

MX2800 M13 Multiplexer User Manual

Transaction Language 1 (TL1), Section 9

61200290L1-1G

9-17

5. TL1 ERROR CODES

When the MX2800 denies a received TL1 command, the Output Response message has an associated four
letter error code indicating the reason for denial.

Table 9-5

lists possible error codes.

TL1 Editing

TL1 editing commands allow the MX2800 to be provisioned through a TL1 session rather than through the
menu system that is accessed using a VT100 terminal emulator. User account information must be provi-
sioned through a console menu session or TL1 session prior to initiating a TL1 session. Once a TL1
session has been initiated using the ACT-USER command, see

Table 9-2

on page 9-6, the TL1 editing

commands may be used. The standard format for an edit command is as follows:

ED-rr:<tid>:<aid>:<ctag>:::<keyword>=<value>;

The parameter descriptions are as follows:

• rr is T1, T2, T3, or EQPT

• <tid> is the Target Identifier

• <aid> is the Access Identifier

• <ctag> is a 1-to-6 character correlation tag (echoed in response)

• <keyword> is one of the entries from the data dictionaries in

Table 9-6

on page 9-20,