Section 3, configuration, Introduction, Section 3 configuration -1 – ADTRAN MX2800 M13 User Manual
Page 41: Introduction -1, Figure 3-1. configuration menu -1, Section 3, Configuration
Advertising
61200290L1-1G
3-1
S
ECTION
3, C
ONFIGURATION
Section 3
Configuration
1. INTRODUCTION
To configure the MX2800, use a 10Base-T Ethernet connection, a SLIP/PPP modem port, or a VT100
terminal.
shows the Configuration menu.
NOTE
A Telnet menu session has priority over a terminal menu session through
the craft port. If a terminal menu session is active when a Telnet menu
session is initiated, the terminal menu session will be disabled until the
Telnet session is closed.
Figure 3-1. Configuration Menu
Detailed descriptions of the menu selections are given in the following subsections. The Configuration
menu provides the following five submenus:
•
Advertising