Hangup, Last modem response, Snmp management options – ADTRAN MX2800 M13 User Manual
Page 61: Snmp state, Trap ip addresses, Trap generation, Hangup -21 last modem response -21, Snmp management options -21
Advertising
MX2800 M13 Multiplexer User Manual
Configuration, Section 3
61200290L1-1G
3-21
Hangup
Selecting this option forces the MX2800 to end an established call.
Last Modem Response
This status field displays the last modem response to the MX2800. Possible responses are as follows:
• OK
• Connect
• Busy
• Error
• No Dialtone
• No Carrier
SNMP Management Options
SNMP State
Use this menu to Enable or Disable SNMP for the MX2800. When disabled, the MX2800 ignores all
incoming SNMP packets and does not transmit SNMP packets.
Trap IP Addresses
This field is used to enter up to five IP addresses of SNMP managers to which the MX2800 sends traps.
Trap Generation
Use this menu, see
, to designate which error conditions cause the unit to send trap messages.
Advertising