WIKA CF1H User Manual
Page 3
Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007
- 3 -
--- CONTENTS ---
1 Model names
----------------------------------------------------------------------------------------------------
6
2 Name and functions of the sections
2.1 Names and displays ----------------------------------------------------------------------------------------
7
2.2 Keys ------------------------------------------------------------------------------------------------------------
8
3 Setup
3.1 Taking the internal assembly out ------------------------------------------------------------------------
9
3.2 Switch setting (multi-function) ---------------------------------------------------------------------------- 9
3.3 Insertion of the internal assembly ----------------------------------------------------------------------- 12
4 Operations
4.1 Operating flow chart ---------------------------------------------------------------------------------------- 13
4.2 Operations
(1) PV/SV display mode -------------------------------------------------------------------------------------
16
(2) Main setting mode ---------------------------------------------------------------------------------------- 17
(3) Sub setting mode
Setting value memory number selection ------------------------------------------------------------
17
Auto-tuning
Perform/Cancel
---------------------------------------------------------------------------
17
Main proportional band setting ------------------------------------------------------------------------
18
Cooling proportional band setting --------------------------------------------------------------------
18
Integral time setting --------------------------------------------------------------------------------------
18
Derivative time setting -----------------------------------------------------------------------------------
18
Main control proportional cycle setting -------------------------------------------------------------- 19
Cooling control proportional cycle setting ----------------------------------------------------------
19
Manual reset setting -------------------------------------------------------------------------------------
19
Alarm 1 setting --------------------------------------------------------------------------------------------
20
Alarm 2 setting --------------------------------------------------------------------------------------------
20
Heater burnout alarm setting --------------------------------------------------------------------------
20
Loop break alarm time setting -------------------------------------------------------------------------
21
Loop break alarm span setting ------------------------------------------------------------------------
21
(4) Auxiliary function setting mode 1
Setting value lock designation -------------------------------------------------------------------------
22
Main setting value high limit setting ------------------------------------------------------------------
23
Main setting value low limit setting -------------------------------------------------------------------
23
Sensor correction setting -------------------------------------------------------------------------------
23
Overlap band/Dead band setting ---------------------------------------------------------------------
24
Remote/Local changing ---------------------------------------------------------------------------------
24
Instrument number setting ------------------------------------------------------------------------------
24
Transfer rate selection -----------------------------------------------------------------------------------
25
Communication
protocol---------------------------------------------------------------------------------
25