Konica Minolta bizhub 282 - Manual (Page 122)

Basic copy operation 3
362/282/222 3-7
Ba
sic co
py ope
ra
tio
n
Chapter 3
Operations where the setting specified first is given priority
If a warning message appears, indicating that settings cannot be combined,
those settings cannot be specified together.
The procedure for selecting the “Corner Staple” setting after setting the
“Booklet” function is described below.
1
Set the “Booklet” func-
tion.
2
Select the “Corner Sta-
ple” setting.
The message “This
mode is not available
with Booklet.” appears
and the “Corner Staple”
setting cannot be select-
ed.
The “Booklet” function
remains selected and
the “Corner Staple” set-
ting is canceled.
To select the “Corner Staple” setting, cancel the “Booklet” function,
and then select the “Corner Staple” setting.