Konica Minolta bizhub 282 - Manual (Page 125)

3 Basic copy operation
3-10 362/282/222
Ba
sic co
py ope
ra
tio
n
Chapter 3
To place the document on the original glass
0 For details on the types of documents that can be placed on the original
glass, refer to “Original documents” on page 7-17.
0 When placing the document on the original glass, be sure to lift open the
original cover or ADF at least 15°.
If the document is placed on the original glass without the original cover
or ADF being lifted at least 15°, the correct document size will not be de-
tected.
0 Do not place objects weighing more than 4-1/2 lb on the original glass. In
addition, do not press down extremely hard on a book spread placed on
the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the orig-
inal cover or ADF. When a document is being scanned with the original
cover or ADF open, do not look directly at the light that may shine through
the original glass. Although the light that shines through the original glass
is bright, it is not a laser beam and, therefore, is not as dangerous.
1
Lift open the original cover or ADF.
2
Position the document face down onto the original glass.
– Load the document pages so that the top of the document is to-
ward the back or the left side of the machine.
15˚ 15˚
When loaded in the
w orientation: When loaded in the
v orientation: