Konica Minolta bizhub 282 - Manual (Page 52)

Before making copies 2
362/282/222 2-3
Be
fo
re
m
a
king
c
o
p
ie
s
Chapter 2
2 Reverse Automatic Document Feed-
er DF-620 Automatically feeds one document sheet at a
time for scanning, and automatically turns over
double-sided documents for scanning if the
document was set as double-side from the
touch panel
Referred to as the “ADF” throughout the manu-
al.
3 Paper Feed Cabinet PC-108 The top tray can be loaded with up to 500
sheets of paper, and the bottom tray can be
used as storage.
Referred to as the “single paper feed cabinet”
throughout the manual.
4 Paper Feed Cabinet PC-206 Both the top and bottom trays can each be
loaded with up to 500 sheets of paper.
Referred to as the “double paper feed cabinet”
throughout the manual.
5 Paper Feed Cabinet PC-407 Can be loaded with up to 2,500 sheets of paper
Referred to as the “LCT” throughout the manual.
6 Desk DK-506 Allows this machine to be set up on the floor
Referred to as the “desk” throughout the manu-
al.
7 Job Separator JS-502 Allows printed pages to be separated
Pull the lever when taking out the paper.
Referred to as the “job separator” throughout
the manual.
8 Finisher FS-530 Feeds out printed pages. The “Sort” setting
(separate by copy set), “Group” setting (sepa-
rate by page), Staple settings (stapling), and
Punch settings (hole punching) are available.
Referred to as the “finisher” throughout the
manual.
9 Output Tray OT-602 Copy output tray installed onto the finisher and
used for separating printed pages
Referred to as the “optional output tray”
throughout the manual.
10 Saddle Stitcher SD-507 Installed onto the finisher to allow copies to be
stapled or bound at the center
Referred to as the “saddle stitcher” throughout
the manual.
11 Mailbin Kit MT-502 Installed onto the finisher to divide printed pag-
es and feed them into the appropriate bin as-
signed to a specific individual or group (only
with PC printing)
Referred to as the “mailbin” throughout the
manual.
12 Punch Unit PU-501* Installed onto the finisher to allow hole punching
to be used
Referred to as the “punch unit” throughout the
manual.
13 Fax Kit FK-503* Allows this machine to be used as a fax machine
No Part name Description