Konica Minolta bizhub 282 - Manual (Page 403)

11 Utility mode
11-62 362/282/222
Utility mode
Ch
apt
er
11
11.11 Specifying security settings (Security Setting param-
eters)
When the “Enhance Security” parameter of “Security Setting” is applied on
this machine, various security functions are forcibly set in order to prevent
unauthorized use of this machine and increase security when managing
saved data. Restrictions are applied to user operations, and box operations
and print jobs are limited.
There are various settings that must first be specified or are forcibly set in or-
der for “Enhance Security” to be set to “ON”. Before setting “Enhance Secu-
rity” to “ON”, check the settings for the security functions.
2
Reminder
Before specifying encryption settings, disconnect network cables other
than the telephone cable from the machine.
If there are settings that are incompatible with “Enhance Security”, “En-
hance Security” cannot be set to “ON”.
2
Note
The settings that must be specified or are forcibly set cannot be changed
after “Enhance Security” is set to “ON”.
Before specifying the “Enhance Security” parameter
The following settings must first be specified in order to set “Enhance Secu-
rity” to “ON”.
Administrator Management screen Settings
Admin. Set—Administrator Code Input Specify a password that meets the password rules.
If the specified password does not meet the pass-
word rules, “Enhance Security” can be set to “ON”;
however, the password will be invalid when it is en-
tered in the Administrator Management screen.
HDD Management—HDD Lock Setting If the optional hard disk drive is installed, a 20-digit
hard disk locking password will be specified.
Encryption Setting If security kit SC-504 is installed, encryption is spec-
ified. Either a locking password or encryption must
be specified.