Konica Minolta bizhub 282 - Manual (Page 123)

3 Basic copy operation
3-8 362/282/222
Ba
sic co
py ope
ra
tio
n
Chapter 3
3.3 Feeding the document
The document can be loaded into the optional ADF or positioned on the orig-
inal glass.
To load the document into the ADF
0 Do not load documents that are bound together, for example, with paper
clips or staples.
0 For details on the types of documents that can be loaded into the ADF,
refer to “Original documents” on page 7-17.
0 Do not load more than 80 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise a document misfeed or dam-
age to the document or machine may occur. However, a document that
exceeds 80 pages can be scanned in separate batches. For details, refer
to “Scanning a document in separate batches (“Separate Scan” setting)”
on page 3-12.
0 If the document is not loaded correctly, it may not be fed in straight or a
document misfeed or damage to the document may occur.
1
Slide the adjustable doc-
ument guides to fit the
size of the document.
Document feed method Features
Using the ADF By using the ADF, a multi-page document can be fed auto-
matically, one page at a time. This feed method can also be
used to automatically scan double-sided documents.
Using the original glass Place the document directly on the original glass so that it
can be scanned. This method is best with books and other
documents that cannot be fed through the ADF.