Konica Minolta bizhub 282 - Manual (Page 153)

3 Basic copy operation
3-38 362/282/222
Ba
sic co
py ope
ra
tio
n
Chapter 3
3
Touch [Set Zoom].
The Set Zoom screen
appears.
4
Using the keypad, type
in the desired zoom ratio
(between ×0.250 and
×4.000).
– If a value outside the
allowable range is
specified, the mes-
sage “Input Error”
appears. Type a val-
ue within the allowa-
ble range.
– If the value was in-
correctly entered, press the [C] (clear) key in the keypad to erase the
value, and then specify the correct value.
– To store a “Minimal” zoom ratio, type in the desired zoom ratio be-
tween ×0.900 and ×0.999.
5
Touch the button or
[Minimal] where the new
zoom ratio is to be
stored.
6
Touch [Enter].
The XY Zoom screen appears again.