Tone volume parameters, Panel cleaning, Toner supply – Konica Minolta bizhub 282 User Manual
Page 361
11
Utility mode
11-20
362/282/222
Utility mode
Ch
apt
er
11
!
Detail
For details on the “Print Management” and “POP3 RX” parameters, refer
to the User’s Guide [Facsimile Operations].
Tone volume parameters
In the User Management screen, sound levels can be specified for the “Con-
firmation Beep”, “Alarm Volume”, “Line Monitor Sound”, and “Job Complete
Beep” parameters.
2
Note
The “Line Monitor Sound” parameter appears only if the optional fax kit
is installed.
Panel Cleaning
2
Note
To exit the Panel Cleaning screen, press the [Reset] key.
Toner Supply
Parameter
Description
Default setting
Confirmation Beep
Specify the volume (between 0 and 5) of the
tone produced when a key is pressed.
3
Alarm Volume
Specify the volume (between 0 and 5) of the
tone produced when an alarm is sounded.
3
Line Monitor Sound
Specify the volume (between 0 and 5) of the
sound produced when a transmission is be-
ing monitored.
3
Job Complete Beep
Specify the volume (between 0 and 5) of the
tone produced when a job is completed.
3
Parameter
Description
Panel Cleaning
A screen is displayed so the control panel can be cleaned.
Parameter
Description
Toner Supply
Select this parameter if the copies have become faint, for example, im-
mediately after the toner bottle is replaced or after copying a large
quantity of documents with large printed areas.