Konica Minolta bizhub 282 - Manual (Page 313)

9 Replacing toner bottles and staples and emptying punch waste containers
9-6 362/282/222
Re
pla
c
in
g to
ne
r bo
tt
les and
st
ap
les and
e
m
pt
ying
p
unch wast
e co
nt
ain
e
rs
Chapter 9
8
Flip down the toner bot-
tle holder so that it locks
into place. Grab the seal
on the toner bottle, and
then slowly pull it off to-
ward you.
9
Insert the toner hopper
until it snaps into place.
10
Close the front door.
2
Reminder
When the front door is closed, toner replenishing begins automatically.
While the toner is being replenished, do not turn the machine off or open
any door of the machine.
!
Detail
If the print is faint immediately after the toner bottle is replaced, replenish
the toner. For details on replenishing toner, refer to “Toner Supply” on
page 11-20.