2 specifying paper settings for the bypass tray, To specify the paper size (change setting), Specifying paper settings for the bypass tray -8 – Konica Minolta bizhub 282 User Manual
Page 259: To specify the paper size (change setting) -8
7
Copy paper/original documents
7-8
362/282/222
C
o
p
y
pa
pe
r/
or
igin
a
l
d
o
cu
m
e
nts
Chapter 7
7.2
Specifying paper settings for the bypass tray
This section describes the procedures for specifying the size and type of pa-
per loaded in the bypass tray.
!
Detail
For details on loading the paper into the bypass tray, refer to “Loading
paper into the bypass tray” on page 2-60.
To specify the paper size (Change Setting)
Standard paper sizes can be specified for the paper loaded into the bypass
tray.
This is useful, for example, when the size of the paper that is loaded cannot
be automatically detected (such as with paper in inch sizes).
1
Load the paper into the bypass tray.
2
In the Basics screen,
touch [Paper].
The Paper screen ap-
pears.
3
Select the button for the
bypass tray.
4
Touch [Change Setting].