Konica Minolta bizhub 282 - Manual (Page 40)

Installation and operation precautions 1
362/282/222 1-9
In
sta
llat
ion
a
nd
o
per
at
ion
p
re
c
a
u
ti
on
s
Chapter 1
1.2 USER INSTRUCTIONS
FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
WARNING: The design and production of this unit conform to FCC regula-
tions, and any changes or modifications must be registered with the FCC and
are subject to FCC control. Any changes made by the purchaser or user
without first contacting the manufacturer will be subject to penalty under
FCC regulations.
This device must be used with shielded interface cables. The use of non-
shielded cable is likely to result in interference with radio communications
and is prohibited under FCC rules.
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE
4) (For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
For users in countries subject to Class B regulations
For users in countries not subject to Class B regulations
This device must be used with shielded interface cables. The use of non-shielded cable is likely
to result in interference with radio communications and is prohibited under CISPR 22 rules and
local rules.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
This device must be used with shielded interface cables. The use of non-shielded cable is likely
to result in interference with radio communications and is prohibited under CISPR 22 rules and
local rules.