Konica Minolta bizhub 282 - Manual (Page 76)

Before making copies 2
362/282/222 2-27
Be
fo
re
m
a
king
c
o
p
ie
s
Chapter 2
Automatically returning to the default settings (Automatic panel reset)
If the [Reset] key is not pressed and no operation is performed for a specified
length of time, settings that have not been programmed, such as the number
of copies, are cleared and return to their default settings.
This is the automatic panel reset operation.
As the factory default, the automatic panel reset operation is performed after
1 minute.
!
Detail
The length of time until the automatic panel reset operation is performed
and whether or not it is performed can be set from Utility mode. For de-
tails, refer to “Auto Reset” on page 11-13.
Whether or not the automatic panel reset operation is performed when
there is a change of user can be set from the Utility mode. For details, re-
fer to “Auto Reset when Account is changed” on page 11-14.
Automatically returning to the screen given priority
If no operation is performed for a specified length of time, the screen is au-
tomatically changed to that for the mode given priority.
As the factory default, the Copy mode screen is displayed after 1 minute.
!
Detail
The mode screen that is displayed can be changed from the Utility mode.
For details, refer to “Default Screen” on page 11-17.