Konica Minolta bizhub 282 - Manual (Page 178)

Basic copy operation 3
362/282/222 3-63
Ba
sic co
py ope
ra
tio
n
Chapter 3
3.12 Stopping/deleting a job
The following procedure describes how to stop scanning the document, stop
the printing operation and delete the copy job.
To stop/delete a copy job
0 If a document is being scanned for a job, pressing the [Stop] key stops
scanning and printing.
1
Press the [Stop] key
while a document is be-
ing scanned or a job is
being printed.
After the message
“Copy cycle temporarily
suspended.” appears,
scanning and printing
stops.
The Stop screen ap-
pears.
2
Perform the desired operation.
– To delete a stopped or queued job, touch the button for the job to
be deleted. The job is deleted.
– To continue the stopped job, press the [Start] key.
!
Detail
A job can also be deleted from the Job List screens. For details, refer to
“To delete a job” on page 4-25.
A function other than a copy function cannot be selected while pages are
being scanned for copying, while copy scanning is paused, or while print-
ing is paused.
Stop
Start